- Detailed Description
- Features and Specs
- Printable Info
BendPak HDS-14LSXE - 14,000 Lb. Capacity, Alignment, Limo Extended
BendPak's HD-Series alignment lifts are engineered to meet the
strenuous demands of even your toughest professional lifting jobs.
Designed into every HD-Series lift is a laundry list of key features as
long as your arm to ensure that BendPak is the absolute best you can
The HDS-14LSX is the sturdy beast you want as the backbone of
your shop; especially if you specialize in servicing larger, low ground
clearance vehicles. Our alignment system features front turn plates and
rear slip plates built right into the runways. The wheels always respond
to your adjustments with no resistance or hassle.
We call it “free floating.” You’ll call it unbelievably easy.
It’s just another way that you can bet on BendPak lifts for
increased durability, safety and productivity. Spend less time worrying
about what you’re working under and more time doing what you love. Our
commercial-grade lifts are second to none and recognized the world-over
as benchmarks of dependability and quality.
The HDS-14LSXE features aircraft-quality stainless steel and
aluminum pneumatic cylinders that release all four locks simultaneously
with the simple push of a button. The spring-loaded safety locks
automatically engage continuously when raising the lift. For added
safety, a second lock system acts as an automatic slack-cable device,
automatically engaging in the event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully
enclosed within the lift structure.
Love the super-long lifting and aligning power of the
HDS-14LSXE, but need something a little different? Check out the
|Dual-hub cable sheaves
Huge 10-1/2” diameter cable sheaves within the runway and
cross tubes combined with massive 2-1/4” diameter sheave axles
dramatically improve cable wear and critical component lifespan meaning
you’ll spend less money in service related expenses down the road.
Dual-hub cable sheaves reduce stress, fatigue and wear.
|Heavy-duty aircraft cable
BendPak's HDS-Series lifts feature four ½” diameter 6 x
25 stainless-steel lifting cables that have a breaking strength of over
14,000 pounds each. This aircraft-quality cable was specifically
designed for lifting applications and provides a great balance between
abrasion resistance and fatigue.
|Adjustable height locking positions
Each column features multiple adjustable height locking
positions for variable-height parking and infinite leveling. 12" x 10"
base plates provide a solid foundation.
Grease fittings are located on every sheave and sheave
axle to help keep these critical parts well lubricated and to simplify
Multi-caster slip plates in the back and turn plates in the
front allow for extremely precise, free-floating alignment.
Dual recessed turn plate pockets allow you to position the
corrosion resistant galvanized turn plates in the location best suited
for individual vehicle positioning - provides for more clearances
related to allowable equipment installations.
|Hidden hydraulic cylinder
Each HDS-Series four-post is equipped with a single 3-1/2”
diameter hydraulic cylinder hidden away under the runway for maximum
performance and reliability and minimum exposure to elements. The welded
cylinder body is made from high strength steel tubing produced to
exceed ASTM specifications.
hydraulic cylinder features a one-piece, pilot fitted, machined steel
piston wrapped with high-durometer, mechanically loaded rod seals,
pressure loaded U-cup piston seals, backups and wear bands that
virtually eliminate any fluid bypass. The micro-smooth chrome-rod is
machined from high yield, ground and polished C-1045/50 micro-alloy
steel and plated to a minimum of .001½ diametrically, to ensure superior
cylinder operation and life.. This combination of superb base material
and superior processing ensures straight, smooth, cylinders that will
provide years and years of dependable trouble-free service.
An integrated hydraulic flow restrictor provides a
controlled descent in the unlikely event of an unexpected hose rupture.
|Durable powder coat
A durable powder coat finish can withstand harsh
environments and chemical sually inspected then sandblasted. (2) All
parts are washed in five-stage phosphate tanks then immediately dried,
to avoid rusting. (3) All surfaces and/or threaded holes that need to be
masked or plugged are done so with high-temperature masking tape and
silicone plugs. (4) The parts are given a quick thinner wipe to remove
any light debris or fingerprints. (5) Finished parts are hung on an
electro-statically grounded conveyor line, then powder is applied using
an electrostatic spray gun. (6) Once the parts are powder coated, the
carts are rolled into our curing oven and baked at 400 degrees for 15
for 45 minutes.
|Spring-loaded safety locks
Spring-loaded safety locks automatically engage continuously
during rise and adjustable safety ladders allow for precise runway
leveling even when installed on sloped floors.
|Push-button pneumatic lock release
A simple push-button pneumatic lock release makes lowering
operations simple and fast. Aircraft-quality stainless steel and
aluminum pneumatic cylinders will provide years of trouble-free service.
|Secondary lock system
A secondary lock system is on constant guard and acts as a
slack-cable device in the unlikely event of an unexpected cable failure.
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.
|Electric hydraulic power system
A maintenance-free electric hydraulic power system assures
ultimate dependability. All operator controls are conveniently located
within easy reach.
Non-skid runways provides maximum grip, even when the
runway surface is wet or oily. Extended length approach ramps feature
automatic rear wheel chocks and help when loading low ground clearance
Longer approach ramps
These approach ramps were designed a little longer to help
when loading low ground clearance vehicles. It's the little bit that
makes a big difference.
|Flexible protective conduit
Hydraulic hoses and airlines are routed through a flexible protective conduit.
|Rolling bridge jacks
Optional 7,000-pound capacity rolling jacks (model RJ-7)
make a great addition to increase service capacity. RJ-7 bridge jacks
are used to raise the front or rear portion of a vehicle off the runways
allowing operators to perform efficient wheel and brake service. A pair
of jacks allows the entire vehicle to elevated. Each jack has
telescoping arms and frame contact pads that can be extended over the
runways and positioned under vehicle lifting points. Telescoping rail
supports accommodate adjustable runways for different tread widths. Each
jack features three safety-lock positions and stackable truck and van
adapters for increased lifting height and better access to frame contact
points on high ground-clearance vehicles. The jacks come equipped with a
commercial grade air-hydraulic pump requiring a maximum pressure of 125
PSI and 10-20 CFM.
- 14,000-lb. lifting capacity
- Two runway lengths to choose
- Heavy‐duty turn plates and integrated rear slip‐plates included
- Multi‐position turn plate pockets
- Automatic leveling system
- Runways include rail‐kit for optional accessories
- Electric/hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Internal “Anti-Sway” slider blocks in each column
- Features oversize sheaves and heavy‐duty ½” aircraft cable
- Rugged 1‐3/8” roller axles and oversize self‐lubricating cable sheaves
- Multi‐position safety locks in each column with push‐button safety release
- Runways adjust for different tread widths and feature non‐skid surface
- Optional 7,000 pound capacity bridge jacks available (Model RJ‐7)
- Lifting capacity: 14,000 lbs. / 6,350 kg
- Front axle max capacity: 7,000 lbs. / 3,175 kg
- Rear axle min capacity: 7,000 lbs. / 3,175 kg
- Overall width: 130" / 3,301 mm
- Outside length: 243" / 6,170 mm
- Overall length: 271" / 6,893 mm
- Height of columns: 92" / 2,338 mm
- Runway min height: 7-5/8" / 192 mm
- Max rise: 70" / 1,778 mm
- Max lifting height: 77-5/8" / 1,970 mm
- Width between posts: 120" / 3,046 mm
- Runway width: 20" / 508 mm
- Width between runways: 37-1/2" – 51-1/2" / 953 mm – 1,314 mm
- Length of runways: 229" / 5,816 mm
- Min 4-wheel alignment: 90" / 2,289 mm
- Max 4-wheel alignment: 155" / 3,947 mm
- Max 2-wheel alignment: 204" / 5,182 mm
- Min wheelbase @ rated capacity: 170" / 4,318 mm
- Min wheelbase @ 75% capacity: 145" / 3,683 mm
- Min wheelbase @ 50% capacity: 120" / 3,048 mm
- Min wheelbase @ 25% capacity: 95" / 2,413 mm
- Locking positions: 13
- Lock spacing: every 4" / 102 mm
- Lifting time: 60 sec
- Motor: 220 VAC / 60 Hz / 1 Ph
- Shipping weight: 3,455 lbs. / 1,567 kg
- Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm