BendPak XR-12000A Quatra™ 12,000-lb. Capacity, Scissors Wheel Alignment Lift

Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas. At the same time, the unique quad-opposing scissors design eliminates restrictive arm structures found on other scissors, giving the technician an unprecedented freedom of movement beneath the lift. The XR-12000A provides you full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom and efficiency than you thought possible beneath a car lift.

The Quatra™ Series Pantograph Lifts from BendPak™ - Raising the Bar
The distinctive Quatra™ series lifts by BendPak™ revolutionize the lifting industry by offering a 12,000-pound lifting capacity and a true vertical lift for a more compact footprint, better accommodating smaller service bays and work areas. Their unique quad-opposing pantograph scissors design eliminates restrictive arm structures found on other scissors car lift types that typically get in the way. Quatra lifts provide you with full, unobstructed vehicle access and effortless workspace entry and exit. More space means more freedom for you to work and work efficiently which increases productivity and most of all, your profits. No other scissors lift on the market offer the freedom that BendPak’s Quatra series lifts provide.

The extended length Quatra XR-12000A was designed for vehicle alignments and general service work and accommodate a wide variety of wheelbases. Integrated recessed full-floating front radius plates and oversized rear slip-plates enable you to perform four-wheel alignments on a full spectrum of vehicles ranging from full-size work trucks to modern mini cars. The Quatra XR-12000A is also compatible with all leading alignment instrumentation, including new 3D systems and camera type wheel aligners.

Make more money by going straight…up.
Quatra series alignment car lifts deliver straight-up vertical lifting unlike parallelogram style scissors lifts that require more floor space due to their lateral lifting characteristics. Because there is no forward or rearward movement, the result is a more compact footprint to accommodate smaller service bays and work areas.

Compared to parallelogram and other traditional scissor lifts, the Quatra series delivers:

• Increased work space below the car lift and around the runways
• Unobstructed access points for easy entry and exit - front, rear and both sides
• Up front walk through for making unhindered wheel alignment adjustments

Better by design
With an excellent combination of speed and ergonomic design, BendPak’s Quatra pantograph scissor lifts improve technician efficiency and productivity which can help you improve overall profitability. Featuring rapid rise and descent speeds, they position vehicles smoothly to any desired height with simple to operate controls. A sophisticated yet simple six-cylinder master-slave hydraulic circuit provides precise equalized lifting without the need for complicated electronics that often fail when subjected to high-use and soiled work environments.

The Quatra XR-12000A incorporates a full-menu of engineering and design enhancements that provide long term ruggedness and increased dependability. From the hydraulic cylinders and safety locking mechanisms, to fluid controls and pneumatics, all integral system components are enclosed within the runways to help protect them from harmful corrosives and operational damage. With few moving parts, and an uncomplicated fluid power system, BendPak’s Quatra alignment lifts offer the most economical and dependable method of lifting, delivering you many years of trouble free service.

It’s all in the approach
When it comes to positioning vehicles on the auto lift, there is no other lift on the market that makes it easier. They feature extendable, hinged, collapsible, and stowable approach ramps - an industry first. The extendable approach ramps deliver a range of motion from 56” all the way up to an incredible 79” overall length in mere seconds. Not only do these user favorites make it convenient to drive ground hugging cars on the lift, when space is tight, their collapsible and stowable design means you’re able to close the shop doors at the end of the day.

In short, the Quatra series lifts by BendPak are the solution for customers who want one of the industry’s most comprehensive auto lift packages with productivity and more importantly, profitability enhancing features.

Balanced Lifting
Quatra lifts are equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

Key Features

• 12,000-lb. lifting capacity
• Extended runway design for greater vehicle capacity
• Integrated recessed full-floating front radius plates and over-sized rear slip-plates
• Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
• Durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection
• Extendable, hinged, collapsible, and stowable approach ramps 
• Multi-position runway work steps 
• Non-skid runways provide sure grip for vehicles and technicians 
• Dependable electric/hydraulic power system 
• Cylinders feature integrated velocity fuses to control sudden descent
• Power console features simple operator controls 
• Open front design with clear center, sides and rear 
• Multi-position automatic leveling system 
• Quad automatic safety locks with pneumatic push-button release 
• Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation 
• Lubricated-for-life bearings on all pivot points 
• Rugged steel legs and formed steel runways 
• Turned, ground, polished and hardened zinc plated axle pins 
• Grease nipples on all moving pins and bearings 
• High efficiency hydraulic power unit provides faster raising and descent times 
• Easy access to hydraulic/electrical components for simple routine servicing 
• Easy to use and understand operator controls 
• Power unit console with easy access front panel 
• Can be flush mounted or recessed

• Optional 6,000-pound capacity rolling jacks (model RJ-6) make a great addition to increase service capacity. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.
• An integrated rolling bridge airline kit is available that installs neatly within the runway to create a more tidy hose routing solution for single or dual jack purpose.
• The XR-12000A is equipped with an intelligent hydraulic regulating manifold featuring four, two-position ball valves to balance hydraulic pressure accurately between the master and slave cylinders for precise, equalized lifting of the runways. The manifold valve assembly is located at the power console with removable cover for simple routine maintenance and adjustment.

• Lifting capacity: 12,000 lbs. / 5,443 kg
• Overall width: 86" / 2,184 mm
• Overall length / approach ramps extended: 296-1/2" / 7,531 mm
• Overall length / approach ramps collapsed: 276-1/2" / 7,023 mm
• Overall length / approach ramps stowed: 242-1/2" / 6,512 mm
• Runway width: 24" / 610 mm
• Width between runways: 37-1/2" / 952 mm
• Length of runways: 219-1/2" / 5,575 mm
• Min. 4-wheel alignment: 85" / 2,159 mm
• Max. 4-wheel alignment: 160" / 4,064 mm
• Max. 2-wheel alignment: 194" / 4,928 mm
• General service wheelbase: 194" / 4,928 mm
• Min. runway height: 11-1/4" / 286 mm
• Max. rise: 68" / 1,727 mm
• Max. lifting height: 74" / 1,880 mm
• Min. wheelbase @ rated capacity: 155" / 3,937 mm
• Min. wheelbase @ 75% capacity: 135" / 3,429 mm
• Min. wheelbase @ 50% capacity: 110" / 2,794 mm
• Min. wheelbase @ 25% capacity: 90" / 2,286 mm
• Locking positions: 13" apart
• Standard Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings.