BendPak RJ-9 Sliding Bridge Jack

The RJ-9 9,000-lb. capacity rolling bridge jack is specifically designed for use with your HD-18 or HDS-18 series four post lift.

This scissor-style rolling bridge jack accessory is designed to jack vehicles quickly and easily. Raise 2 or 4 wheels off the car lift runways, so repair and maintenance jobs like brake and suspension work is easier than ever. Exclusive telescoping rollers allow the runways to be adjusted for varying tread widths, so there’s no need for adapters to work on a range of vehicles. Reaching the factory approved jacking points is easy with an RJ-9—the precision rollers enable quick positioning anywhere beneath the vehicle.

BendPak rolling jacks for four-post car lifts are designed to be there when you need them and gone when you don’t. Just remove your RJ-9 when you want the tires set back on the car lift runways. Each jack comes complete with three safety-lock positions and stackable pad adapters for extra clearance when needed. Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.

• 9,000-lb. lifting capacity
• Steel lifting pads standard
• Optional rubber lifting pads available
• High-pressure hydraulic power unit
• Optional air-line kit
• Stackable adapters

• Lifting capacity: 9,000 lbs. / 4,091 kg
• Min support arm width: 41" / 1,041 mm
• Max support arm width: 51-1/2" / 1,308 mm
• Min pad & adapter: 8" / 203 mm
• Min pad only: 4-1/2" / 114 mm
• Max pad & adapter: 18" / 457 mm
• Max pad only: 14-1/2" / 362 mm
• Min arm reach: 40-1/4" / 1,022 mm
• Max arm reach: 63-1/4" / 1,607 mm
• Shipping weight: 360 lbs. / 164 kg
• Shipping dimensions: 36" x 22" x 21" / 914 mm x 559 mm x 533 mm