BendPak HD-7P

7,000 lb. Capacity / Narrow Width / Short Runways / High Rise  

100" Height, 99.75" Width, 200" Length

The HD-7P is a 7,000-lb. capacity, narrow-configuration four-post lift. This model offers compact convenience, so it also helps maintain an open, fresh appearance in more spacious garages. The HD-7P also does not require a special foundation, nor does it involve complicated installation procedures – it’s simply the perfect service lift for shops or garages with limited floor space. Shaving 10.5” off the overall width of a standard-size model, the HD-7P can store classic cars, racers and compact vehicles comfortably and safely. 

Lease from $138/month
Back
Back

Features

  • 7,000-lb. maximum lifting capacity
  • High lift with short runways
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • High-speed lifting
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Ramps feature non-skid surface
  • Push-button pneumatic safety release
  • Optional 4,500-lb. capacity rolling jack available (Model RJ-45)
Back

HD-7P Specifications

*This diagram is intended for illustrative purposes only and should not be construed as an authoritative representation of the actual product, system or design. 

Capacity

Lifting Capacity*
7,000 lbs. (3,175 kg)
*Max Capacity / Front Axle
3,500 lbs. (1,588 kg)
*Max Capacity / Rear Axle
3,500 lbs. (1,588 kg)

Rise  

A - Min. Runway Height:
4.5" (114 mm)
B - Max. Clearance On Top Lock:
79.8" (2026 mm)
C - Max. Lifting Height:
86.5" (2,197 mm)
Time to Full Rise:
35

Outside Dimensions

D - Overall Width:
99.75" (2,534 mm)
E - Outside Length:
174" (4,420 mm)
F - Overall Length:
200" (5,080 mm)
G - Height of Columns:
100" (2,540 mm)

Inside Dimensions

H - Width Between Columns:
89.75" (2,280 mm)
I - Drive-Thru Clearance:
76.5" (1,943 mm)

Runways

J - Runway Width:
19" (483 mm)
K - Length of Runways:
164" (4,166 mm)
L - Width Between Runways:
37.5" (953 mm) or
M - Runway Centerline:
56.5" (1,435 mm) or
N - Outside Edge of Runways:
75.5" (1,918 mm) or

Minimum Wheelbase

Rated Capacity:
115" (2,921 mm)
75% Capacity:
100" (2,540 mm)
50% Capacity:
85" (2,159 mm)
25% Capacity:
70" (1,778 mm)

Locking

Locking Positions:
15
Lock Spacing:
Every 4" / 102 mm

Power Unit

Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 db

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Back