R23LT Tire Changer

The Ranger R23LT tire changer is a high end tilt tower machine designed to handle the needs of heavy volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the chance of expensive wheels getting damaged.

DST2420 Wheel Balancer

The Ranger DST2420 wheel balancer is a highly accurate and dependable no frills balancer that features our proprietary Digital Sensor Technology for critical reliability and repeatability. From one bay shops to high volume tire stores, the DST2420 is built with a gritty toughness that puts out perfectly balanced wheels day after day, around the clock. Like all of our DST Series wheel balancers, it's a zero tolerance performer that features our proven Direct Axis drive system, accurate to within hundredths of an ounce ensuring wheels are balanced vibration free.

R23LT

• Inflation gauge with integrated air dump valve
• Inflation pressure regulator/limiter
• Water filter
• Oiler / lubricator
• Air regulator
• Breaker bar
• Large soap / lubricator bucket
• Brush
• Traveling drop-center hold down device
• Inflation restraint device
• Inflation system
• Tool tray / bin storage
• Optional motorcycle turntable clamps
• Drive system type: electric / air
• Motor:2 Hp / 110 - 220 VAC / 50 - 60 Hz
• Air requirement: 110 - 175 psi / 8 - 12 bar
• Wheel clamping method: 4 internal / external clamps
• Table clamping system: dual pneumatic cylinders
• Bead breaking system: pneumatic blade
• Power assist towers: optional
• Tool holder: air-lock mounting
• Tower design: tilt-back
• Bead roller: single / left
• Powerful "Jet-Blast" bead seating system: TurboBlast / bead seating
• Internal rim clamping capacity: 11.5" – 24" / 292 mm - 610 mm
• External rim clamping capacity: 10" – 22" / 254 mm - 559mm
• Turntable width capacity: 4" – 18" / 102 mm – 457 mm
• Bead breaker width capacity: 1.5" – 16" / 38 mm – 406 mm
• Maximum tire diameter: 47" / 1,194 mm
• Shipping weight: 958 lbs. / 435 kg

DST2420

• Dynamic, Static, Motorcycle-ATV, and Performance Alloy settings
• A multi-user save function holds presets to increase productivity
• An ergonomic control board and easy-to-read LED display has vibrant visual cues and keypad to improve efficiency and proper balancing techniques for faster floor-to-floor times
• A simultaneous retrieval of static, dynamic and ALU1\ALU2\ALU3 data, identifies weight placement configurations for a variety of wheel styles and designs with the simple push of a button
• Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
• Low RPM balancing speed and rapid six-second cycle time
• Automatic braking
• Gram/ounce selection and millimeter/inch selection
• Automatic round-off with top-dead-center weight position indicator
• Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques
• Manual or automatic start when hood is lowered.
• Self calibration function
• High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
• Precision-machined, hardened-steel 36-mm shaft.
• Quick-release hub nut for dramatically reduced set-up times
• Side-position brake hold wheels at precisely 12-o’clock for proper weight placement.
• Side cone storage pegs keeps accessories readily available
• New “open-side” hood design allows for a broader coverage of tire shapes and sizes
• Motor: 1.5 hp / 110V/220V 50/60HZ 1Ph..
• Working temperature: -5C/27F - 50C/82F
• Drive system: belt drive
• Cycle time: 6 - 9 seconds (avg.)
• Balancing modes: dynamic / static / 3-alloy
• Top positioning weight locator: standard
• Inside & outside measuring: standard
• Millimeter / inches selection: standard
• Ounce / gram selection: standard
• Wheel offset distance setting: manual
• Self-calibration function: standard
• Auto start when hood is lowered: standard
• Wheel spin braking: automatic / electronic
• Wheel holding manual brake pedal: standard
• Centering cones included: 3 standard / 1 truck
• Truck cone / spacer ring adapter set: included standard
• Wheel calipers: standard
• Rear cone mount spring: standard
• No-mar rear cone mount pressure cup: standard
• Quick-release & mount hub nut: standard
• Maximum tire diameter: 47" / 1,194 mm
• Max tire weight: 145 pounds (65 kg)
• Max. wheel diameter: 10" - 24" / 254 mm - 610 mm
• Wheel width capacity: 2" - 18" / 51 mm - 457 mm
• Balancing increments: 0.25 or 0.01 oz
• Balancing speed: 180 rpm
• Accuracy: +/- 1 gram / .035 oz
• Resolution (round off mode): 0.01 ounce, 1.4°
• Shipping weight: 398 lbs. / 181 kg