BendPak 580V-601

V-MAX Elite™ Air Compressor / 5 HP / 80 Gallon / Vertical Tank / Single Phase

The TS-580V 601 Elite air compressor is designed to save energy. Built for high productivity and lower operating costs, it produces more compressed air using an extremely efficient and low-energy-consuming 5 HP motor.High-quality, slow running cast iron compressor pumps deliver proven longevity in the most demanding conditions. Because they run at a slower RPM than most comparable units, they’re quieter, run cooler and cost less to operate. 100% cast iron pumps provide the quality and performance needed for heavyuse applications like automotive and body repair to manufacturing and industrial service.



Lease from $79/month

Features

  • Extra-quiet, low-RPM pump
  • 5 HP energy‐efficient motor
  • Pressure switch ensures efficient operation at all times with no wasted energy
  • Cast‐iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed‐in sleeves
  • Cast‐iron Elite pump features simple splash lubrication for total reliability and a finned cylinder configuration that provides 360° cooling
  • Dual drive belts require less belt tension resulting in less load on pump bearings, longer belt life and low vibration
  • Fully‐enclosed belt guard
  • ASME-rated tank
  • Large surface area and cooling fins on cylinders and forced‐air after-cooler provides efficient heat dissipation for lower operating temperatures and dryer air. Compressor runs cooler, oil life is extended and maintenance is reduced
  • Precision honed cylinders increase efficiency and oil control
  • Oversized ductile iron crankshaft provides extra strength and longer wear
  • Tapered roller main bearings provide full contact and support of the crankshaft and needle‐type piston pin bearings properly distribute bearing loads
  • Precision balanced flywheel has forced‐air fan blades for optimum compressor cooling and life
  • Magnetic starter provides thermal overload protection and minimizes start loads providing long life and trouble‐free operation
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
  • Balanced flywheel and counterbalanced crankshaft provides vibration‐free operation
  • Readily accessible disc‐valves do not require disassembly of compressor piping for easy accessibility and reduced maintenance cost and downtime
  • Corrosion resistant tubing for coolers, separators and valves for longer life and reduced maintenance
  • High‐density, die‐cast aluminum alloy rods minimize reciprocating weight
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
  • Automatic pressure switch provides auto start and stop
  • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start‐up compression
  • Pressure gauge with service valve
  • Oversize replaceable air filter

TS-580V-601 Specifications

Motor

Horsepower:
5 HP
RPM:
1,740 RPM
Voltage:
208 - 230V
Phase:
1 Ph
Hertz:
60 Hz
Running Amps (SFA):
26-23.8A
Peak Amps:
54-48A
Recommended Breaker:
30A
Noise:
75 dB

Pump

Style:
2-Stage / 2-Piston / Vertical
Lubrication:
Splash / Oil
Material:
100% Cast Iron
Pump RPM:
625 RPM
Duty Cycle:
Continuous
CFM @ 90 PSI:
17.9 CFM
CFM @ Max PSI:
17.2 CFM
Auto Turn-On Pressure:
145 psi
Auto Shut-Off Pressure:
175 psi
Max PSI:
175 psi

Tank

Orientation:
Vertical
Size:
80 gallon
Outlet:
1/2" Fitting
Certification:
ASME

Dimensions

Width:
39" (991 mm)
Depth:
79" (2,007 mm)
Height:
26" (660 mm)
Weight:
619 lbs. (281 kg)

Shipping

Weight:
619 lbs. (281 kg)
Dimensions:
39" x 26" x 79" (991 mm x 660 mm x 2,006 mm)