BendPak 7580V-601

V-MAX Elite™ Air Compressor / 7.5 HP / 80 Gallon / Vertical Tank / Single Phase

The V-Max Elite 7580V-601 air compressor combines leading-edge technology with the superior build quality. Featuring the rugged V-Max extreme-duty, four-cylinder pump design, the 7580V-601 is engineered to operate at maximum efficiency under all load conditions. This rugged, two-stage, lubricated reciprocating air compressor with 100% cast-iron pumps will provide the quality and performance required for every air-intensive application—from automotive and body repair to manufacturing and industrial service.

Lease from $91/month

Features

  • 7.5 HP energy-efficient motor
  • Extra-quiet, low-RPM pump
  • Cast-iron V-Max Elite pump features simple splash lubrication for total reliability and a "V-4" finned cylinder configuration that provides 360° cooling
  • Proven air-cooled design is economical, reliable and environmentally friendly
  • Two compression rings and one oil control ring provide excellent oil control and high-efficiency air delivery
  • Dual drive belts require less belt tension, resulting in less load on pump bearings, longer belt life and low vibration
  • Fully-enclosed belt guard
  • Cast-iron pump and heads are more stable under heavy workloads and do not warp from heat like aluminum cylinders with pressed-in sleeves
  • ASME-rated tank
  • Large surface area and cooling fins on cylinders and forced-air after-cooler provide efficient heat dissipation for lower operating temperatures and dryer air. Air compressor runs cooler, oil life is extended and maintenance is reduced
  • Tapered roller main bearings provide full contact and support of the crankshaft, and needle-type piston pin bearings properly distribute bearing loads
  • Precision balanced flywheel has forced-air fan blades for optimum compressor cooling and life
  • Magnetic starter provides thermal overload protection and minimizes start loads, providing long life and trouble‐free operation
  • ASME-rated safety valve protects the compressor from overpressure and safeguards the operator
  • Balanced flywheel and counterbalanced crankshaft result in nearly vibration-free operation
  • Readily accessible disc-valves do not require disassembly of compressor piping, for easy accessibility and reduced maintenance cost and downtime
  • Corrosion-resistant tubing for coolers, separators and valves for longer life and reduced maintenance
  • Oversized ductile iron crankshaft provides extra strength and longer wear
  • High-density, die-cast aluminum alloy rods minimize reciprocating weight
  • Rugged cast iron oil reservoir has convenient sight gauge glass, large oil drain and convenient fill cap
  • Automatic pressure switch provides auto start and stop
  • Integrated pressure unloader valves are built into the intake valve assembly on the compressor head, reducing internal pump heat from initial start-up compression
  • Pressure gauge with service valve

VMX-7580V-601 Specifications

Motor

Horsepower:
7.5 HP
RPM:
1,740 RPM
Voltage:
208-230VAC
Phase:
1 Ph
Hertz:
60 Hz
Running Amps (SFA):
32.8-30A
Peak Amps:
68-63A
Recommended Breaker:
35A
Noise:
75 dB

Pump

Style:
Two-Stage / V-4
Lubrication:
Splash / Oil
Material:
100% Cast Iron
Pump RPM:
625 RPM
Duty Cycle:
Continuous
CFM @ 90 PSI:
30.5 CFM
CFM @ Max PSI:
26.5 CFM
Auto Turn-On Pressure:
145 PSI
Auto Shut-Off Pressure:
175 PSI
Max PSI:
175 PSI

Tank

Orientation:
Vertical
Size:
80 gallon
Outlet:
1/2" Fitting
Certification:
ASME

Dimensions

Width:
39" (991 mm)
Depth:
70" (1,778 mm)
Height:
26" (660 mm)
Weight:
711 lbs. (323 kg)

Shipping

Weight:
711 lbs. (322 kg)
Dimensions:
39" x 26" x 70" (991 mm x 660 mm x 1,778 mm)