BendPak HD-14T

14,000 lb. Capacity / High Lift / 82" Rise

The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 lbs. worth of automobile into the air without breaking a sweat.The HD-14T offers superior lifting power with an extended 82” rise, meaning it’s big, really big. Commercial fleets of trucks and vans will be right at home in your service bay with this model. Impress your customers by accommodating a wider variety than the competition, no matter what vehicles they bring in.

Lease from $180/month

Features

  • 14,000-lb. lifting capacity
  • Extra lift height
  • Long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Hardened-steel sheaves with self-lubricating bearings
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional RJ-7 air-hydraulic bridge jacks increase service capability

HD-14T Specifications

Capacity

Lifting Capacity*
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)

Rise

A - Min. Runway Height:
7.625" (194 mm)
B - Max. Rise:
82" (2,083 mm)
C - Max. Lifting Height:
86.5" (2,197 mm)
Time to Full Rise:
65 seconds

Outside Dimensions

D - Overall Width:
126" (3,200 mm)
E - Outside Length:
205" (5,207 mm)
F - Overall Length:
234" (5,944 mm)
G - Height of Columns:
101" (2,565 mm)

Inside Dimensions

H - Width Between Columns:
115.5" (2,934 mm)
I - Drive-Thru Clearance:
98" (2,489 mm)

Runways

J - Runway Width:
20" (508 mm)
K - Length of Runways:
191" (4,851 mm)
L - Width Between Runways:
37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:
57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:
77.5" (1,969 mm) or 91" (2,311 mm)

Minimum Wheelbase

Rated Capacity:
140" (3,556 mm)
75% Capacity:
120" (3,048 mm)
50% Capacity:
100" (2,540 mm)
25% Capacity:
80" (2,032 mm)

Locking

Locking Positions:
16
Lock Spacing:
Every 4" (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.