BendPak HD-9ST

9,000 lb. Capacity / Narrow Width / Standard Length / Standard Rise
This narrow-width, 9,000-lb. HD-9ST four-post lift offers the same power and safety features of the HD-9, but in a smaller package. Some garages are just a bit too small for a standard four-post lift so finding a way to make a smaller footprint without sacrificing functionality is what BendPak set out to do with this four-post lift and they've done it with flying colours. Featuring an open center, it doubles as both a narrow parking lift and maintenance lift - making this the perfect fit for wrenchers with limited space. 
$4,365.00 $3,895.00
Lease from $100/month

Features

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Two different ramp lengths to choose from
  • Narrow width for space efficiency
  • Freestanding design
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

HD-9ST Specifications

Capacity

Lifting Capacity*
9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle
4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle
4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:
4.5" (114 mm)
B - Max. Rise:
70" (1,778 mm)
C - Max. Lifting Height:
74.5" (1,892 mm)
Time to Full Rise:
45 seconds

Outside Dimensions

D - Overall Width:
100.25" (2,546 mm)
E - Outside Length:
174" (4,420 mm)
F - Overall Length:
200" (5,080 mm)
G - Height of Columns:
88" (2,235 mm)

Inside Dimensions

H - Width Between Columns:
89.75" (2,280 mm)
I - Drive-Thru Clearance:
76.5" (1,943 mm)

Runways

J - Runway Width:
19" (483 mm)
K - Length of Runways:
164" (4,166 mm)
L - Width Between Runways:
37.5" (953 mm)
M - Runway Centerline:
56.5" (1,435 mm)
N - Outside Edge of Runways:
75.5" (1,918 mm)

Minimum Wheelbase

Rated Capacity:
115" (2,921 mm)
75% Capacity:
100" (2,540 mm)
50% Capacity:
85" (2,159 mm)
25% Capacity:
70" (1,778 mm)

Locking

Locking Positions:
12
Lock Spacing:
Every 4" (102 mm)

Power Unit

Motor:
220 VAC / 60 Hz / 1Ph
Noise:
45 dB

Shipping

Weight:
1,872 lbs. (851 kg)
Dimensions:
180" x 22" x 40" (4,572 mm x 559 mm x 1,016 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.