BendPak HDS-27

27,000 lb. Capacity
If you need a bigger, better four-post lift that can handle a 27,000-lb., Class 7 semi-truck, you need the HDS-27. Bigger sheaves and beefier components carry on BendPak's legacy of dependability. If your shop services commercial and/or municipal vehicles, this lift is practically mandatory. This garage lift brings you into the realm of construction equipment, commercial flatbed trucks, concrete mixers, garbage trucks and busses, so you can keep the "biggest and baddest" commercial and municipal vehicles up to code and ready for the next haul.
Lease from $448/month

Features

  • 27,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Supersized 12" diameter cable sheaves
  • Stainless steel lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jack

HDS-27 Specifications

Capacity

Lifting Capacity*
27,000 lbs. (12,247 kg)
*Max Capacity / Front Axle
13,500 lbs. (6,123 kg)
*Max Capacity / Rear Axle
13,500 lbs. (6,123 kg)

Rise

A - Min. Runway Height:
83.5" (2,121 mm)
B - Max. Rise:
60" (1,524 mm)
C - Max. Lifting Height:
68.5" (1,740 mm)
Time to Full Rise:
75 seconds

Outside Dimensions

D - Overall Width:
154" (3,912 mm)
E - Outside Length:
257" (6,528 mm)
F - Overall Length:
297" (7,544 mm)
G - Height of Columns:
93" (2,362 mm)

Inside Dimensions

H - Width Between Columns:
134" (3,404 mm)
I - Drive-Thru Clearance:
109" (2,769 mm)

Runways

J - Runway Width:
22" (559 mm)
K - Length of Runways:
263" (6,680 mm)
L - Width Between Runways:
38" (965 mm) or 56" (1,422 mm)
M - Runway Centerline:
60" (1,524 mm) or 78" (1,981 mm)
N - Outside Edge of Runways:
82" (2,083 mm) or 100" (2,540 mm)

Minimum Wheelbase

Rated Capacity:
185" (4,699 mm)
75% Capacity:
160" (4,064 mm)
50% Capacity:
135" (3,429 mm)
25% Capacity:
110" (2,794 mm)

Locking

Locking Positions:
9
Lock Spacing:
Every 6" / 152 mm

Power Unit

Motor:
220 VAC / 60 Hz. 1Ph.
Noise:
45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.