BendPak PL-12000DPS

12,000-lb. Capacity (6,000 lb per deck) / Parking Lift / Tandem / Independent Platforms / Standard Rise / Standard Length / 220V Power Unit BP5585482 / SPECIAL ORDER

The all-new PL-12000DPS from BendPak is a revolutionary vehicle storage solution. With the strength to handle loads up to 6,000 lbs. and a footprint considerably smaller than other mechanical parking systems, the PL-12000DPS is the perfect way to increase useable parking space. This is the standard-rise, standard length model.

Lease from $481/month
Back
Back

Features

  • Dual hydraulic cylinders with heavy-duty galvanized lifting cables
  • Multi locks for multi-height parked settings 
  • Wide baseplates for maximum stability
  • Dual electric-hydraulic parked settings
  • Heavy-duty steel construction
  • Front and rear wheel chocks
  • 6,000 lb. capacity per side
  • Built-in wheel stops
  • High-speed lifting
  • Standard rise, standard length model
  • Perfect for cars, light trucks, motorcycles, and ATVs
  • Superstructure features durable powder-coat finish
  • Full-width platforms to keep bottom vehicles protected
  • Lightweight, extended aluminum ramps can be easily stowed
Back

PL-12000DPS Specifications

 

Specifications

Number of Platforms
2
Load Capacity per Platform
6,000 lbs. (2,722 kg)
Total Width 
221.5" / (5,624mm)
Outside Length
174" (4,418mm)
Total Length
218.5" / (5,550mm)
Total Height
118.5"/ (3,009mm)
Min. Runway Height
4.75" / (121mm)
Maximum Rise
70.2" / (1,784mm)
Width Between Posts
211" (5,362mm)
Width Between Short & Double Posts
100.25" (2,546mm)
Width Between Platforms
29" (739mm)
Width Between Runways
35" or 41" / (887 or 1,045mm)
Runway Length
159" (4,039mm)
Runway Width
85" / (2,161mm)
Drive Thru Height
68.5" / (1,742mm)
Outside Edge of Runways
76" or 82" / (1,930mm or 2,083mm)
Safety Lock Positions*
6
Lifting Time
45 Seconds
Power Unit / Motor
220 VAC, 50/60Hz, 1PH

*Requires minimum 5CFM, 40 PSI air source.

Back
Back