BendPak PLT-6S

6,000 lb. Capacity / Parking Lift / Two-Post Tilt Platform / Special Order / **Sale - Only 2 Left!** / Regular $5,440 - Save $1,245

BendPak’s PLT-6S parking lift was designed for both commercial and residential use and is the perfect car parking solution when ceiling clearances are limited, and vehicle heights are restricted. Each PLT-6S parking lift features dual hydraulic lifting cylinders and a high-strength safety lock system. For many parking lift operators, the appeal of hydraulic lifts is too great to ignore. For one, there are no chains, cables, cable sheaves, etc. that require periodic maintenance. With 6,000-lbs. of hydraulic lifting power, the PLT-6S is sure to be one of your favorite lifts. 

$5,440.00 $4,195.00
Lease from $108/month


  • 6,000-lb. lifting capacity
  • Accommodates cars and small SUVs
  • Heavy steel locks automatically engage at full-rise
  • Manually operated lock release
  • Dual hydraulic lifting cylinders
  • Cantilevered design with lateral torsion bar
  • No chains or cables
  • Individual, or single multi-unit power unit configurations
  • For commercial or residential applications
  • Manually operated lock release
  • Hydraulic safety valves (velocity fuses)
  • Available in 110V or commercial 220V power options

PLT-6S Specifications


Two-Post Parking Lift


Lifting Capacity:
6,000 lbs. (2,722 kg)
Overall Width
98.3” (2,497 mm)
Overall Length
153.5” (3,899 mm)
Overall Height
74” (1,880 mm)
Platform Width
79.1” (2,010 mm)
Platform Length
134.9” (3,427 mm)
Platform Rise
50.6” (1,286 mm)
Ramp Rise
62.9” (1,599 mm)
Leg Length
98.8” (2,509 mm)
Lifting Time
55 seconds
Standard Motor
220 VAC / 60 Hz / 1Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.