BendPak XPR-10AXLS

10,000 lb. Capacity / Asymmetric / Dual-Width / Extended Height / Extended Rise
Work in total comfort with the XPR-10AXLS. This two-post, asymmetric, Clearfloor lift will alleviate back and neck pain during hours of service by adding 6" of lift and extends the overall height by 6" - perfect for the taller individual. This particular two-post lift features a massive 75" cylinder stroke, which means that instead of just extending the columns for the sake of more clearance, this lift can raise the bottom of a vehicle 6" higher than the standard 10K lift height. 
$5,570.00 $4,825.00
Lease from $124/month

Features & Specs

  • Lift arms shown with optional foot guards
  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single‐piece columns
  • Dual hydraulic direct‐drive cylinders
  • Automatic arm restraints
  • Lowered arm tube supports
  • Maintenance-free UHMW load bearings
  • Oversized 59" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Single‐point safety release
  • Safety locks in each column spaced every 3"
  • Automatic overhead shutoff
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • ALI ​Certified

Capacity

Lifting Capacity*
10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle
5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle
5,000 lbs. (2,268 kg)

Rise

A - Rise:
75" (1,905 mm)
B - Rise + Pad Only:
79.75" (2,026 mm)
C - Rise + Pad + 63 mm Adapter:
82.75" (2,102 mm)
D - Min. Height + Pad:
4.75" (121 mm)
Time to Full Rise:
50 seconds

Outside Dimensions

E - Height Overall:
157" (3,988 mm)
F - Width Overall:
137" (3,480 mm) or 145" (3,683 mm)
G - Outside Columns:
133.25" (3,385 mm) or 141.25" (3,588 mm)

Inside Dimensions

H - Inside Columns:
106.25" (2,699 mm) or 114.25" (2,902 mm)
I - Drive-Thru Clearance:
93.75" (2,381 mm) or 101.75" (2,584 mm)
J - Floor To Overhead Switch:
147" (3,734 mm)

Arms & Pads

K - Front Arm Reach: (MIN)
23.5" (597 mm)
K - Front Arm Reach: (MAX)
43.75" (1,111 mm)
L - Rear Arm Reach: (MIN)
40.25" (1,022 mm)
L - Rear Arm Reach: (MAX)
58" (1,473 mm)
Screw Pad Adjustment:
2" (51 mm)
Max Load Per Arm
2,500 lbs. (1,134 kg)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB