BendPak XPR-10S-168

10,000 lb. Capacity / Symmetric / Dual Width / Extended Height
The XPR-10S-168 symmetric two-post lift is our standard XPR-10S with a 24" bolt-on height extension to handle taller vehicles. It features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. 
Lease from $121/month

Features

  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • Triple‐telescoping front arms
  • ETL Approved

XPR-10S-168 Specifications

Capacity

Lifting Capacity*
10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle
5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle
5,000 lbs. (2,268 kg)

Rise

A - Rise:
69" (1,753 mm)
B - Rise + Pad Only:
75" (1,905 mm)
C - Rise + Pad + 63 mm Adapter:
77.5" (1,969 mm)
D - Min. Height + Pad:
6.75" (171 mm)
Time to Full Rise:
45

Outside Dimensions

E - Height Overall:
169" (4,293 mm)
F - Width Overall:
132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns:
126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

H - Inside Columns:
105.5" (2,680 mm) or 118.5" (3,010 mm)
I - Drive-Thru Clearance:
93" (2,362 mm) or 106" (2,692 mm)
J - Floor To Overhead Switch:
141" (3,581 mm)

Arms & Pads

K - Front Arm Reach: (MIN)
27.5" (699 mm)
K - Front Arm Reach: (MAX)
51.5" (1,308 mm)
L - Rear Arm Reach: (MIN)
34" (864 mm)
L - Rear Arm Reach: (MAX)
54.5" (1,384 mm)
Screw Pad Adjustment:
2" (51 mm)
Max Load Per Arm
2,500 lbs. (1,134 kg)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 db

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list