BendPak XPR-10S-LP

10,000 lb. Capacity / Symmetric / Dual-Width / Low-Profile Arms
The XPR-10S-LP two-post, low-profile lift offers exceptional direct-drive lifting performance. Sporting two-stage, low-profile arms, this industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that’s ahead of its time and a 10,000-lb. lifting capacity. All height/width variations fit in shops with ceilings higher than 12’, and none of them will crowd your floor while you work beneath a vehicle. Every XPR-10S two-post lift features our telescoping screw pad assembly kit. 
$4,540.00 $4,250.00
Lease from $110/month

Features

  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • Low-Profile Two-Stage Arms
  • ETL Approved

XPR-10S Specifications

Capacity

Lifting Capacity*
10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle
5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle
5,000 lbs. (2,268 kg)

Rise

A - Rise:
69" (1,753 mm)
B - Rise + Pad Only:
75" (1,905 mm)
C - Rise + Pad + 63 mm Adapter:
77.5" (1,969 mm)
D - Min. Height + Pad:
6.75" (171 mm)
Time to Full Rise:
45

Outside Dimensions

E - Height Overall:
145" (3,683 mm)
F - Width Overall:
132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns:
126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

H - Inside Columns:
105.5" (2,680 mm) or 118.5" (3,010 mm)
I - Drive-Thru Clearance:
93" (2,362 mm) or 106" (2,692 mm)
J - Floor To Overhead Switch:
141" (3,581 mm)

Arms & Pads

K - Front Arm Reach: (MIN)
27.5" (699 mm)
K - Front Arm Reach: (MAX)
51.5" (1,308 mm)
L - Rear Arm Reach: (MIN)
34" (864 mm)
L - Rear Arm Reach: (MAX)
54.5" (1,384 mm)
Screw Pad Adjustment:
2" (51 mm)
Max Load Per Arm
2,500 lbs. (1,134 kg)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 db