BendPak XPR-10XLS

10,000 lb Capacity / Symmetric / Adjustable-Width / Screw Pads / High Rise

With BendPak's 10,000-lb. capacity XPR-10XLS symmetrical two-post lift in your shop, most cars, trucks and SUVs will be raised quickly and effortlessly. Fully ALI Certified, this model features an extra-high lifting carriage. The taller carriage offers an extra 6" of lift, which means vehicles can be raised a full 75" (about 80" with adapters). Taller mechanics will enjoy this feature, since it means they no longer must bend, stoop, strain and even injure themselves while they spend hour after hour working underneath lifted vehicles.

Lease from $121/month

Features & Specs

  • Lift arms shown with optional foot guards
  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Single‐piece columns
  • Dual hydraulic direct‐drive cylinders
  • Automatic arm restraints
  • Lowered arm tube supports
  • Maintenance-free UHMW load bearings
  • Oversized 59" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Single‐point safety release
  • Safety locks in each column spaced every 3"
  • Automatic overhead shutoff
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • ALI ​Certified

Capacity

Lifting Capacity*
10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle
5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle
5,000 lbs. (2,268 kg)

Rise

A - Rise:
75" (1,905 mm)
B - Rise + Pad Only:
79.75" (2,026 mm)
C - Rise + Pad + 63 mm Adapter:
82.25" (2,089 mm)
D - Min. Height + Pad:
4.75" (121 mm)
Time to Full Rise:
50 seconds

Outside Dimensions

E - Height Overall:
157" (3,988 mm)
F - Width Overall:
132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns:
126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

H - Inside Columns:
105.5" (2,680 mm) or 118.5" (3,010 mm)
I - Drive-Thru Clearance:
93" (2,362 mm) or 106" (2,692 mm)
J - Floor To Overhead Switch:
147" (3,734 mm)

Arms & Pads

K - Front Arm Reach: (MIN)
25.5" (648 mm)
K - Front Arm Reach: (MAX)
49.5" (1,257 mm)
L - Rear Arm Reach: (MIN)
32.25" (819 mm)
L - Rear Arm Reach: (MAX)
52.5" (1,334 mm)
Screw Pad Adjustment:
2" (51 mm)
Max Load Per Arm
2,500 lbs. (1,134 kg)

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Note: Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2017 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).