BendPak XR-12000A

12,000 Lb. Capacity Quatra™ / Full-Rise Scissor / Alignment
In-Stock Special - One Only - SAVE $4,800!

BendPak's Quatra™ alignment lift is the next evolution in industrial-strength lifting technology. 12,000 lbs. of true vertical lifting power for a more compact footprint will better accommodate smaller service bays and work areas. The XR-12000A provides you full, unobstructed vehicle access.No other scissor lift on the market offers the freedom that BendPak’s a Quatra lift provides.

$23,865.00 $19,050.00
Lease from $434/month

Features

  • 12,000-lb. lifting capacity
  • Extended runway design for greater vehicle capacity
  • Integrated recessed full-floating front radius plates and over-sized rear slip-plates
  • Turn plate pockets feature adjustable leveling bolts for infinite turn plate leveling
  • Durable powder-coat finish that can withstand harsh environments and chemical spills and will provide years of protection
  • Extendable, hinged, collapsible, and stowable approach ramps
  • Multi-position runway work steps
  • Non-skid runways provide sure grip for vehicles and technicians
  • Dependable electric/hydraulic power system
  • Cylinders feature integrated velocity fuses to control sudden descent
  • Power console features simple operator controls
  • Open front design with clear center, sides and rear
  • Multi-position automatic leveling system
  • Quad automatic safety locks with pneumatic push-button release
  • Collapsible front tire stops clear for low vehicle skirts and alignment instrumentation
  • Lubricated-for-life bearings on all pivot points
  • Rugged steel legs and formed steel runways
  • Turned, ground, polished and hardened zinc- plated axle pins
  • Grease nipples on all moving pins and bearings
  • High-efficiency hydraulic power unit provides faster raising and descent times
  • Easy access to hydraulic/electrical components for simple routine servicing
  • Easy-to-use and understand operator controls
  • Power unit console with easy access front panel
  • Can be flush-mounted or recessed

XR-12000A Specifications

Capacity

Lifting Capacity*
12,000 lbs. (5,443 kg)
*Max Capacity / Front Axle
6,000 lbs. (2,722 kg)
*Max Capacity / Rear Axle
6,000 lbs. (2,722 kg)

Rise

A - Min. Runway Height:
11.25" (286 mm)
B - Max. Rise:
75.25" (1,911 mm)
C - Overall Width
89.5” (2,274 mm)
D - Length / Ramps Extended
300.25” (7,626 mm)
D - Length / Ramps Collapsed
283.25” (7,201 mm)
D - Length / Ramps Stowed
250” (6,350 mm)
E - Runway Width
23.75” (604 mm)
F - Width Between Runways
40.5” (1,029 mm)
G - Length of Runways
219.5” (5,575 mm)
H - Min. 4-Wheel Alignment
87” (2,210 mm)
I - Max. 4-Wheel Alignment
160” (4,064 mm)
J - Max. 2-Wheel Alignment
194” (4,928 mm)
K - General Service Wheelbase
199” (5,055 mm)

Minimum Wheelbase

Rated Capacity:
155" (3,937 mm)
75% Capacity:
135" (3,429 mm)
50% Capacity:
110" (2,794 mm)
25% Capacity:
90" (2,286 mm)

Locking

Locking Positions:
14

Power Unit

Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.