Combo Package-HDS14X Lift / RJ-7 Rolling Jack / Airline Kit
Combo Package - Includes BendPak HDS-14X Extended Length 14,000 lb. Capacity Lift, and one RBJ-7 7,000 lb Capacity Rolling Jack and Airline Kit
SAVE $570
Features
- 14,000-lb. lifting capacity
- Mid to long-style approach ramps for low ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Oversized self-lubricating cable rollers
- Rugged 1.75" roller axles
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 7,000-lb. capacity rolling jacks available (Model RBJ7000)
- ETL approved
HDS-14X Specifications
*This diagram is intended for illustrative purposes only and should not be construed as an authoritative representation of the actual product, system or design.
Capacity
Lifting Capacity*
14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle
7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle
7,000 lbs. (3,175 kg)
Rise
A - Min. Runway Height:
7.625" (194 mm)
B - Max. Rise:
70" (1,778 mm)
C - Max. Lifting Height:
77.625" (1,972 mm)
Time to Full Rise:
60 seconds
Outside Dimensions
D - Overall Width:
130" (3,302 mm)
E - Outside Length:
243" (6172 mm)
F - Overall Length:
271" (6,883 mm)
G - Height of Columns:
93" (2,362 mm)
Inside Dimensions
H - Width Between Columns:
120" (3,048 mm)
I - Drive-Thru Clearance:
98" (2,489 mm)
Runways
J - Runway Width:
20" (508 mm)
K - Length of Runways:
229" (5,817 mm)
L - Width Between Runways:
37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:
57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:
77.5" (1,969 mm) or 91" (2,311 mm)
Minimum Wheelbase
Rated Capacity:
165" (4,191 mm)
75% Capacity:
140" (3,556 mm)
50% Capacity:
115" (2,921 mm)
25% Capacity:
95" (2,413 mm)
Locking
Locking Positions:
13
Lock Spacing:
Every 4" (102 mm)
Power Unit
Motor:
220 VAC / 60 Hz / 1 Ph
Noise:
45 dB
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.