Combo Package -HD-9 Lift / RJ-45LP Rolling Jack / Drip Trays / Airline Kit

Combo Package - Includes BendPak HD-9 9,000 lb. Capacity Lift, and one RJ-45LP 4,500 lb Capacity Rolling Jack, Airline Kit and Drip Trays


SAVE $615!
$8,430.00 $7,815.00
Lease from $180/month

Features

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45LP)
  • ETL Approved
  • HD-9 Specifications

    Capacity

    Lifting Capacity*
    9,000 lbs. (4,082 kg)
    *Max Capacity / Front Axle
    4,500 lbs. (2,041 kg)
    *Max Capacity / Rear Axle
    4,500 lbs. (2,041 kg)

    Rise

    A - Min. Runway Height:
    4.5" (114 mm)
    B - Max. Rise:
    70" (1,778 mm)
    C - Max. Lifting Height:
    74.5" (1,892 mm)
    Time to Full Rise:
    45 seconds

    Outside Dimensions

    D - Overall Width:
    110.25" (2,800 mm)
    E - Outside Length:
    174" (4,420 mm)
    F - Overall Length:
    200" (5,080 mm)
    G - Height of Columns:
    88" (2,235 mm)

    Inside Dimensions

    H - Width Between Columns:
    100.25" (2,546 mm)
    I - Drive-Thru Clearance:
    86.5" (2,197 mm)

    Runways

    J - Runway Width:
    19" (483 mm)
    K - Length of Runways:
    164" (4,166 mm)
    L - Width Between Runways:
    37.5" (953 mm) or 44.375" (1,127 mm)
    M - Runway Centerline:
    56.5" (1,435 mm) or 63.375" (1,610 mm)
    N - Outside Edge of Runways:
    75.5" (1,918 mm) or 82.375" (2,092 mm)

    Minimum Wheelbase

    Rated Capacity:
    115" (2,921 mm)
    75% Capacity:
    100" (2,540 mm)
    50% Capacity:
    85" (2,159 mm)
    25% Capacity:
    70" (1,778 mm)

    Locking

    Locking Positions:
    12
    Lock Spacing:
    Every 4" (102 mm)

    Power Unit

    Motor:
    220 VAC / 60 Hz / 1 Ph
    Noise:
    45 dB

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.