Dannmar D-10/CX

10,000 lb capacity / Symmetric /Wide
The D-10/CX is a favorite among shop owners. With an overall width of 145" this auto lift will fit perfectly into most repair bays. With a lifting capacity of 10,000-lbs. this lift was designed to be the workhorse of any automotive repair shop and by utilizing it's wide or narrow configurations, is one of the most versatile lifts and able to accommodate almost any sized repair bay. 
$3,575.00
Lease from $92/month
Features

  • 10,000 lbs lifting capacity
  • Equalization system maintains equal lifting
  • Maintenance-free polyethylene load bearings
  • Single-piece columns for added strength
  • Dual hydraulic cylinders combined with "direct-drive" lifting system provides 2-to-1 lifting speed and rugged dependability
  • Comes standard with truck and van adapter set
  • Oversize column base plates provide strong support
  • Safety locks in each column spaced every three inches 
  • Heavy-duty 3/8" equalizer cables.








  • Lifting Capacity: 10,000 lbs/4535.9kg
  • Style:Clearfloor
  • Overall Height: 145"/3683mm
  • Overall Width (Outside Baseplate): 145"/3683mm
  • Overall Width (Outside Column): 137"/3480mm
  • Width Between Columns: 115"/2921mm
  • Minimum Arm Reach (Front): 32"/813mm
  • Maximum Arm Reach (Front): 52"/1320mm
  • Minimum Arm Reach (Rear): 32"/813mm
  • Maximum Arm Reach (Rear): 52"/1320mm
  • Minimum Pad Height: 4 1/2"/114mm
  • Max Rise (Clearance under Arm): 69"/1753mm
  • Max Lifting Height (Pad Only): 73"/1854mm
  • Max Lifting Height (Pad and 6" Adapter): 79"/2006mm
  • Drive Thru Clearance (Floor): 106"/2695mm
  • Lifting Time: 45 Seconds
  • Motor: 208-230V 1PH 30Amp 60hz
  • Concrete Requirements: 4" Steel Reinforced 3000psi
  • Oil Type: ATF-4 Transmission Fluid