Dannmar D2-10C

10,000-lbs. Capacity Two-Post Lift / Symmetric / Includes Stackable Pads and Adapters
New Arrival / SAVE $230 / Regular $4,490
The Dannmar D2-10C two-post lift is a great choice in direct-drive lifting technology. Dannmar’s 10,000 lb capacity car lift utilizes quality components with a proven design and features an adjustable top beam for wide or narrow installation setups. 
$4,490.00 $4,260.00
Lease from $110/month

Dannmar’s D2-10C symmetric two-post lift uses an adjustable top beam for wide or narrow installation setups. This feature allows choosing the best setting for your shop’s floor space. The design requires very little maintenance.

The D2-10C two-post lift features low-pressure HVLP direct-drive cylinders, so there is no need for lifting chains or screw mechanisms. The dual HVLP low-pressure cylinders minimize leakage and provide better reliability, smoother operation and fewer maintenance costs. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology uses fewer moving parts than a chain-over roller cylinder design. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages.

  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self-lubricating dura-glide UHMW polyethylene bearings
  • Safety locks in each column spaced every 3”
  • Automatic arm restraints
  • Heavy-duty 1/2" aircraft-quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 8-piece stackable adapter set comes standard - 2.75" and 5.5"
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single-point safety release
  • Drop-end arms provide a lower pad height
  • Dual hydraulic direct-drive cylinders
  • Oversized 53" tall carriage for superior strength
  • Triple-telescoping arm design
  • Versatile drop-in contact pads with stackable adapters.
  • ETL Approved
Lifting Capacity10,000 lbs. (4,536 kg)
A - Lowered Height + Pad5" (127 mm)
B - Max. Lift Height (Top Lock)78.5" (1,994 mm)
C - Max. Rise69" (1,753 mm)
D - Height Overall145" (3,683 mm)
E - Width Overall145.25" (3,690 mm)
F - Width Outside Columns137.25" (3,486 mm)
G - Width Inside Columns118.25" (3,004 mm)
H - Drive-Thru Clearance106" (2,692 mm)
I - Floor to Top Switch141" (3,581 mm)
J - Arm Reach32.25" (819 mm) - 52.5” (1,334 mm)
Max. Load per Arm2,500 lbs. (1,134 kg)
Time to Full Rise45 seconds
Noise45 dB
Motor220 VAC / 60 Hz / 1 Ph