Small shops and garages that generate low volumes of used oil can now take advantage of the heating properties that the Firelake 155,000 BTU Waste Oil Heater provides. With its durable 100% aluminized steel corrosion resistant alloy fire chamber and heat exchanger, this three-pass waste oil heater is easy to maintain with clean-out panels on both ends for easy maintenance. Ideal for auto service shops, construction and heavy equipment garages, quick lube shops, auto dealerships, fleet garages and pretty much any location that generates used oil.
**Please check your provincial and municipal regulations to ensure burning of waste oil is allowed and to secure any permits required. Babco is in no way responsible for ensuring that this product is allowed in buyers jurisdiction.**
Firelake Model 155 Waste Oil Heater
Now small shops and garages generating low volumes of used oil can gain the heating advantages of owning a Shenandoah® Waste Oil Heater. The Model 155 delivers high fuel efficiency at an affordable price. It efficiently burns waste oil, transmission fluid and even regular heating oil.
Firelake’s three-pass heater models are easy to maintain with clean-out panels on both ends of the heat exchanger. The three-pass heaters are also durable and designed for maximum heat transfer with 100% aluminized steel corrosion resistant alloy fire chamber and heat exchanger.
Ideal For: auto service shops, construction and heavy equipment garages, quick lube shops, auto dealerships, fleet garages and any other location that generates used oil. The smart choice for hot water applications such as: car washes, auto dealerships, truck repair facilities, quick lube shops, ready mix concrete firms, floor or radiant heat applications.
IMPORTANT NOTICE: Buyers need to check their Provincial and Municipal regulations to ensure burning of waste oil is allowed and to secure any Permits required. BABCO is in no way responsible for ensuring that these heaters/boilers are allowed in the buyer’s jurisdiction.
|Input (approx. BTU/hr.)||155,000 (45.42kW)|
|Output (approx. BTU/hr.)||120,000 (38kW)|
|Stack size||8" / 20.3 cm|
|Shipping Weight||390 lbs./ 177 kg.|
|Heater dimensions (L x W x H)|
Includes outside measurements of fan and burner
|Duct Opening||15" x 15" (38.1 cm)|
|Electrical requirements (maximum circuit protection)||30A ( 15 A for export)|
|Approx. fuel consumption||1.12 GPH|
|Outlet Air Temperature||170 F|
|Compressed air requirements||2 CFM @ 40 PSI / .057 m3/min.@.28Mpa|
|Patents|| US: 5,067,894 utiliy, 331,104 des., 331,105 des.|
CAN: Pat. 2,029,366, 69,374 des., 69,157 des.
|Fuels||Crankcase oil, transmission and hydraulic fluids, as well as other petroleum-based lubricants (any weight combinations up to SAE 50 as well as #1 and #2 fuel oil.)|
|Oil transfer pump||18 GPH @ 35 PSI (68 LPH @ .24 Mpa)|