BendPak HD-7PXW

7,000 lb. Capacity / Super-Tall Lift Platform / ALI/ETL Approved
 
158" Height, 110.25" Width, 224.5" Length
Lease from $229/month
Back
Back

BendPak HD-7PXW Super-Tall Short Runway High Speed Car Lift

 

Features

  • 7,000-lb. maximum lifting capacity
  • Super tall rise delivers 12-feet of lifting height
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Ramps feature non-skid surface
  • Push-button pneumatic safety release
 

The HD-7PXW is literal giant. This 4 post lift will effortlessly lift up to 7,000 lbs. over 12' into the air! Perfect for stacking taller vehicles.

BendPak's HD-7PXW is a super-tall, four-post, runway-style lift platform designed for professional use. A true lifting powerhouse, this high-speed lift will easily hoist 3-1/2 tons to heights exceeding 12'. Now you can finally store your high-profile trucks, vans and Winnebagos.
 

Dependable design
4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
 

Dual-hub cable sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.
 

Multi-level locking positions
The HD-7PXW is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
 

Heavy-duty aircraft cable
Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.
 

Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
 

Large base plates
12" x 12" base plates provide a solid foundation for the HD-7P.
 

Single hydraulic cylinder
Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.
 

Durable powder-coat finish
All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.
 

Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed.
 

Longer approach ramps
These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.
 

Automatic safety locks
Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

 

    Back

    HD-7PXW Specifications

    *This diagram is intended for illustrative purposes only and should not be construed as an authoritative representation of the actual product, system or design. 

    Capacity

    Lifting Capacity*
    7,000 lbs. (3,175 kg)
    *Max Capacity / Front Axle
    3,500 lbs. (1,588 kg)
    *Max Capacity / Rear Axle
    3,500 lbs. (1,588 kg)

    Rise

    A - Min. Runway Height:
    4.5" (114 mm)
    B - Max. Rise:
    140" (3,556 mm)
    C - Max. Lifting Height:
    145" (3,683 mm)
    Time to Full Rise:
    60 seconds

    Outside Dimensions

    D - Overall Width:
    110.25" (2,800 mm)
    E - Outside Length:
    198" (5,029 mm)
    F - Overall Length:
    224.5" (5,702 mm)
    G - Height of Columns:
    158" (4,013 mm)

    Inside Dimensions

    H - Width Between Columns:
    100" (2,540 mm)
    I - Drive-Thru Clearance:
    86.5" (2,197 mm)

    Runways

    J - Runway Width:
    19" (483 mm)
    K - Length of Runways:
    188" (4,775 mm)
    L - Width Between Runways:
    37.5" (953 mm) or 44.5" (1,130 mm)
    M - Runway Centerline:
    56.5" (1,435 mm) or 56.5" (1,435 mm) or 63.5" (1,613 mm)
    N - Outside Edge of Runways:
    75.5" (1,918 mm) or 82.5" (2,096 mm)

    Minimum Wheelbase

    Rated Capacity:
    135" (3,429 mm)
    75% Capacity:
    115" (2,921 mm)
    50% Capacity:
    95" (2,413 mm)
    25% Capacity:
    80" (2,032 mm)

    Locking

    Locking Positions:
    30
    Lock Spacing:
    Every 4" (102 mm)

    Power Unit

    Motor:
    220 VAC / 60 Hz / 1 Ph
    Noise:
    45 dB

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


    * This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page. 
    ** Special Voltages Available Upon Request 
    The design, material and specifications are subject to change without notice.

     

     

    Back