BendPak PL-6SR AutoStacker (Multi-Unit Configuration)

BendPak AutoStacker (Multi-Unit Configuration)
Master Power Unit Required
The Autostacker (PL-6SR) is the fully collapsible parking lift that doubles the vehicle capacity of a single parking space, all while maintaining a 6,000-lb. lifting capacity. Combined together, this multi-unit is ideal for commercial applications, offering a minimal footprint that maximizes expansion all while being visually pleasing to the eye. Get the most out of limited surface area by getting the multi-unit PL-6SR.
Lease from $163/month


  • 6,000‐lb. lifting capacity  
  • Key‐switch disconnect fully disables operation for enhanced security
  • Audible alarm and warning buzzer alerts operator and bystanders when the lift is in operation
  • Accommodates cars, light trucks and SUVs  
  • Rugged, welded‐steel construction is strong and durable
  • 100%  hot‐dipped, galvanized steel platform
  • Attractive slate gray, baked‐on powder coat finish provides added toughness
  • Front wheel dish acts as a wheel chock to prevent vehicles from rolling forward or backward
  • Full‐width, gradual sloping platform reduces entry ramp height
  • Automatic safety locks engage at five different parking heights
  • Simple push‐button controls
  • Dual, direct‐drive hydraulic lifting cylinders  
  • Dependable hydraulic circuit that provides precise, equalized lifting
  • Variable height parking accommodates a wide range of vehicle and ceiling heights
  • Contoured scissor legs provide rigidity, decreased deflection and a low collapsed height
  • Full‐width, straight‐through axles increase overall stability and tracking through the vertical travel range
  • Full‐width pivot pins promote straighter tracking of the scissor legs throughout travel—vital for eccentric loads
  • Extra‐wide, heavy‐duty steel scissor arms with cross member bracing enhance stability
  • Unique clevis‐design scissor ends lower stress and increase rigidity by distributing loads symmetrically over the pins
  • Patented asymmetric scissor arms provide greater underside door clearance
  • Patented Door‐sentry™ car door protectors are made from energy‐absorbing rubber to protect against accidental scratches or door dings
  • Space‐saving design is perfect for commercial or residential applications
  • Minimal footprint fits a typical parking space
  • Hydraulic safety valves (velocity fuses) prevent sudden, unexpected platform collapse in the unlikely event of hydraulic system failure  
  • UL Listed electrical components meet National Electrical Code (NEC) requirements

Low-profile, galvanized steel platform

The hot-dipped galvanized platform of the Autostacker is coated in zinc to protect it from weather and the daily abuse of the most fast-paced home garages and commercial parking lots. Whether your parking lift is installed in a garage or in the great (urban) outdoors, our super-low-profile deck is gently inclined to permit safe, easy clearance for low-stance vehicles.

Automatic safety locks

The more lock positions on a lift, the less chance of catastrophe in the extremely rare event of mechanical or hydraulic failure. Autostacker offers five lock positions. Even at the lowest lock level, a low-standing car fits underneath the platform. The locks engage continuously as the parking lift rises, so there’s literally nothing you need to do other than press the Up and Down buttons to engage and release the locks.

PL-6SR Autostacker Specifications

Lifting Capacity:
6,000 lbs. (2,722 kg)
Overall width:
103.2” (2,620 mm)
Overall length:
144” (3,658 mm)
Platform length:
124” (3,150 mm)
Platform width:
83.8” (2,128 mm)
Platform height (forward):
13” (330 mm)
Ramp height (entry):
2” (51 mm)
Lifting height on top lock:
88.7” (2,255 mm)
Under clearance on top lock:
85.6” (2,150 mm)
208-240V, 50/60 Hz / 1 Ph
52 dB
Shipping Weight:
3,350 lbs. (1,530 kg)