Peak 212C

12,000 lb. Capacity / Clearfloor / ETL Power Unit
 
174" - 198" Height, 150.75" Width, 72.5" - 81.5" Rise

The new Peak 212C is an especially robust lift that can easily lift heavy duty vehicles and trucks. Thanks to Peak's 3-in-1 technology, it also features 3 adjustable heights for various lifting demands. The strengthened three-stage arms are flexible and adjusted to service different vehicles.


✓ Extended Warranty Available

$6,785.00
Lease from $156/month

• 5500kg (12,000 Lbs) Capacity.

• Dual hydraulic direct-drived cylinders,designed and made on high standard,high quality oil

seals for cylinder.

• Aero cable used for synchronization.

• 4 three-stage arms are suitable for more vehicles.

• Self-lubricating UHMW Polyethylene sliders and bronze bush.

• Single-point safety release.

• Clearfloor design, provide unobstructed floor space.

• Overhead safety shut-off device.

• Adjustable height setting accommodate varying service ceiling heights.

• Automatic arms restraints.

212-C Specifications

*This diagram is intended for illustrative purposes only and should not be construed as an authoritative representation of the actual product, system or design. 

 

Capacity

Lifting Capacity*
12,000 lbs. (5,500 kg)
*Max Capacity / Front Axle
6,000 lbs. (2,721 kg)
*Max Capacity / Rear Axle
6,000 lbs. (2,721 kg)

Rise

A - Rise + Pad + Stackable Adaptors on Top Lock:
80" (2,031 mm)
B - Rise + Pad on Top Lock:
71" (1,808 mm)
C - Time To Full Rise:
69 seconds

Outside Dimensions

D - Height Overall:
174" (4420 mm) / 186" (4,725mm) / 198" (5030 mm)
E - Width Overall:
150.8" (3829 mm)

Inside Dimensions

F - Inside Columns:
123.5" (3,137 mm)
G - Drive-Thru Clearance:
109.8" (2,787 mm)

Arms & Pads

H - Front Arm Reach: (MIN)
37.5" (952 mm)
H - Front Arm Reach: (MAX)
66.4" (1,686 mm)
I - Rear Arm Reach: (MIN)
37.5" (952 mm)
I - Rear Arm Reach: (MAX)
66.4" (1,686 mm)
Max Load Per Arm
3,000 lbs. (1,360 kg)