• Home
  • Ravaglioli VISTAR TD3000HP

Ravaglioli VISTAR TD3000HP

Tower-Free 3D Alignment System

One Only at this Price!

The Vistar TD3000HP Alignment Machine utilizes revolutionary 3D imaging to perform alignments with pin-point accuracy and its tower-free design means it’s portable. Bring this machine directly to a vehicle needing an alignment check, even in the parking lot, the TD3000HP will compensate for an unlevel lift or floor. Featuring two systems in one, the TD3000HP utilizes both an alignment and check system, so you can use it to do alignment checks for customers and then take the system to the alignment rack and perform precision alignments. 

$31,995.00 $25,400.00
Lease from $552/month

Ravaglioli VISTAR TD3000HP Tower-Free 3D Alignment System

Vistar TD3000HP Tower-Free 3D Alignment System.....The world's first no push, no roll, tower-free 3D aligner.

Revolutionary 3D imaging alignment machine can be used with more than one lift, off the floor, or in a pit. QC FastCheck software is included for FastCheck alignment tests.

Introducing the Vistar, a truly modern and innovative 3D wheel aligner that offers upgraded performance as compared to conventional 3D systems. Conventional 3D aligners use only single dimensional targets. This is one of the reasons that they require the operator to manually roll the vehicle back and forth so that a 3 dimensional model can be created. The other reason our competitors require you to push and pull on the vehicle is due to adaptor error, a compensation for lateral runout error must be performed. The Vistar System uses true 3 dimensional targets and therefore precision accuracy can be attained without rolling the vehicle on the lift.

Why roll a vehicle on a raised lift if you don't have to?

Vistar 3-D Features & Specs

Features

Exclusive 3D targets:

  • no need for run out compensation
  • extremely light
  • no electronic components inside
  • no maintenance required.

Pair of self-centering 3 point clamps.

Equipped with quick claws approach device.

No metal-to-metal contact.

Bluetooth transmission between measuring heads and control unit.

Can be used on any 4 post or scissors lift.



  • Revolutionary 3D imaging alignment machine can be used with more than one lift, off the floor, or in a pit. QC FastCheck software is included for FastCheck alignment tests.
  • NO-PRTC Technologies (No push, no roll, no tower and no compensation)
  • Compensates for unlevel lift or floor
  • Fast 80 second set up/measuring times
  • Can be used in multiple bays on multiple lifts
  • Use the floor as a measuring surface
  • QC Fast Check Program Included
  • Industrial quality PC managed by Windows
  • VIN DataBase for Quick Search of Vehicle
  • Optional Bar Code Scan Tool
  • Chassis geometry (collision data) shown in linear measurements
  • Calibration not normally needed
  • Highly accurate
  • Lifetime support package
Technical DataAccuracyMeasuring rangeTotal measuring range
Front axle
Total toe+/- 2'+/- 2°+/- 20°
Partial toe+/- 1'+/- 1°+/- 20°
Set-back+/- 2'+/- 2°+/- 5°
Camber+/- 2'+/- 3°+/- 10°
Caster+/- 5'+/- 10°+/- 18°
King-pin+/- 5'+/- 10°+/- 18°
Rear axle
Total toe+/- 2'+/- 2°+/- 20°
Partial toe+/- 1'+/- 1°+/- 20°
Set-back+/- 2'+/- 2°+/- 5°
Camber+/- 2'+/- 3°+/- 10°
Thrust angle+/- 2'+/- 2°+/- 5°