Waste Oil Boilers
Columbia Waste-Oil Boilers
Don’t just waste your waste-oil – heat your shop with a reliable and long-lasting waste-oil boiler by Columbia Boilers. Providing literally decades of steam or hydronic heat by using any type of waste-oil, the L24 and WL60 series of boilers are superbly engineered and built to last.
Recycle and reuse oils such a transmission fluid, crankcase oil, hydraulic fluid, synthetic oils, #1 & #2 fuel oil and even vegetable and cooking oil. Perfect for trucking companies, auto dealerships, truck and auto repair facilities, quick lube shops and just about any facility that creates a steady supply of used oils, a Columbia Waste-Oil Boiler will not only eliminate your heating fuel bill but eliminate your waste-oil hauling expenses as well.
At the heart of all Columbia Waste-Oil Boilers is the patented Shenandoah Burner, an industry-recognized and time-proven burner that incorporates the latest in flame control technology and high-voltage multi-try ignition. Engineered to be easily serviced these series of burners will run for decades.
Contact us to start making your waste-oil work for you.
Please check your provincial and municipal regulations to ensure burning of waste oil is allowed and to secure any permits required. Babco is in no way responsible for ensuring that this product is allowed in buyers jurisdiction.
|Waste Oil GPH (approx.) Min & Max.||1.68||2.5|
|Input BTUH (approx.)||235,000||350,000|
|Gross Output BTUH (approx.)||188,000||280,000|
|Combustion Volume, Cu. Ft.||6.5||6.5|
|Water Volume, Gals.||55||55|
|Portable Water Output @ 100°F rise, gal/hr*||200||264|
|Boiler Width, with controls||35.5"||35.5"|
|Depth, with Burner and Smoke Outlet||55"||55"|
|Compressed Air Requirements (all models)||2CFM @ 40 psi||2CFM @ 40 psi|
|Electrical Requirements (all models)||115/60 15 Amp (220/50 7.5 AMP also available)||115/60 15 Amp (220/50 7.5 AMP also available)|
|Boiler Weight (Dry)||1,450 lbs.||1,450 lbs.|
|Total Shipping Weight (approx.)||1,800 lbs/||1,800 lbs.|
|Operating Pressure||15 psi Steam, 30 psi Water||15 psi Steam, 30 psi Water|
Used crankcase oil, transmission and hydraulic fluids, synthetic oils, and other petroleum based lubricants (any weight combination up to SAE 50 including #1 and #2 fuel oil)
(All models) ASME stamped, ETLM listed (per UL 796, UL 296A, NFPA 31, 70 and 211)
ASME Boiler, ASME Relief Valve, Waste Oil Burner w/Primary Control, Oil Pump and Filter Kit, Installation Kit & Manual, Insulated Flush Jacket, Theraltimeter Gauge, Operating & Manual High-Limit Aquastats or Pressure Controls, Low Water Cut-Off, Cleaning Brush
Oil Storage Tanks, Hydronic Unit Heaters
*Water Coil is an option and must be ordered separately.
|Waste Oil GPH (approx.)||2.5||3.5||4.6||5.7|
|Input BTUH (approx.)||350,000||500,000||650,000||800,000|
|Gross Output BTUH(approx.)||280,000||400,000||520,000||640,000|
|Combustion Volume, Cu. Ft.||10.5||10.5||10.5||10.5|
|Water Volume, Gals.||133||133||133||133|
|Boiler Width, without Controls (inches)||31.5||31.5||31.5||31.5|
|Depth, w/Burner & Smoke Hood (inches)||68||68||68||68|
|Flue Outlet (inches)||10||10||10||10|
|Boiler Weight (Dry)||1,700 lbs.||1,730 lbs.||1,730 lbs.||1,730 lbs.|
|Total Shipping Weight (approx.)||2,450||2,475||2,475||2,475|
|Portable Water Output @ 100°F rise, gallons/hr.||336**||470**||636**||750**|
|Compressed Air Requirements @ 40 psi||2 CFM||4 CFM||4 CFM||4 CFM|
Electrical Requirements (all models)
115/60 15 Amp (220/50 7.5 AMP also available) Water circulator not included
Used crankcase oil, transmission and hydraulic fluids, synthetic oils, and other petroleum based lubricants (any weight combination up to SAE 50 including #1 & #2 fuel oil)
Agency Listings (all models):
ETLM (per UL 796, UL 296A, NFPA 31, 70 and 211) ASME stamped
Canadian Boiler Registration
Nationally Registered for sale and use in Canada, CRN: K0781.1
15 psi Steam, 30 psi Water
*Units over 500,000 BTU may require permit for installation
**Water coils are an option on these models, and must be ordered separately