Cheetah 9011180

18' Series Frame Rack / Two-Tower / Air-Hydraulic

The Cheetah 18-Series Frame Rack is an 18ft, well-manufactured and simple to operate frame-puller. Able to fit in most cramped quarters of an autobody shop due to its rectangular form, the Cheetah 18-Series Frame Rack has a full 360 degrees of pulling radius and 10 tons of hydraulic pulling-power. Offset tower bases make pulling towers closer together easier and with an overall height of 7ft. 9in. – can easily fit in any shop. 

Lease from $561/month
Back
Back

Cheetah 18’ Frame Rack

Based out of Detroit Lakes in Minnesota, Cheetah has been building quality frame racks since the 1980's. Each machine features 360-degree pulling so options are never a problem and each tower features a whopping 10-ton pulling capacity  -(additional towers can be purchased).

A tilt-style bed with drive-on ramps makes loading and unloading simple while the foot-operated air-pump controlling the lift ram makes operation smooth and precise.


The Cheetah 18' frame rack features an 84" wide bed, weighs approximately 4,400-lbs. and with towers stands at 7-foot 9 inches.


  • Designed for unibody cars up to extended cab trucks
  • 5 year warranty on frame rack.
  • Made in the U.S.A.


Rack Includes:

  • (1) - 18' Frame Rack
  • (2) - Pulling Towers
  • (2) - 10' Chains with Slip Hook
  • (2) - Enerpac or SPX Power Team Ram, Pump, and Hose
  • (4) - Unibody Clamps For Adjustable Unibody Anchoring
  • (2) - Drive-On Ramps



Back

Cheetah® 18' Frame Rack Specifications:

Length of Bed (top):
18 ft. (549 cm)
Length with Towers Extended:
23 ft. 9 in. (724 cm)
Width of Bed:
84 in. (213 cm)
Width with Towers Extended:
13 ft. 4 in. (406 cm)
Width of Treadway:
24 in. (61 cm)
Width Between Treadway:
36 in. (91 cm)
Overall Height:
7 ft. 9 in. (236 cm)
Tower Height:
6 ft. (183 cm)
Working Height:
24 in. (61 cm)
Weight:
4400 lbs. (1995 kg)
Power Required for Hydraulics:
100 psi air (6.89 bar)
Pulling Power, Hydraulics:
10 ton (9 metric ton)
Pulling Radius:
360 Degrees