BendPak MDS-6LP/LPF

6,000 lb. Capacity / Open Center / Mid-Rise Scissor Lift

Includes Both Surface and Flush Mount Set-Up
The open-center design of the MDS-6LP makes it a clear leader in convenience and work productivity. Designed for home garages, full-service shops and quick-lube pits, and basically anyone who works on cars. This rugged mid-rise lift is also perfect for shops with low ceilings and its extended lift point spread means vehicles with long wheelbases can be safely raised in seconds flat. The MDS-6LP is a mechanical marvel.
Lease from $187/month
Back
Back

Features

  • Each lift platform features four solid steel-scissor frame support bars, making it one of the strongest mid-rise lifts in its class
  • Dual master hydraulic cylinder combines with dual equalizing cylinders to provide a safe and level 6,000 pound lifting capacity
  • Solid‐steel safety lock bars engage automatically during ascent
  • Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 psi, 10 CFM air source at time of installation.)
  • A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles
  • Hinge point features Zerk grease fitting to allow lubrication at critical wear areas
  • Comes standard with four durable cushioned‐rubber contact blocks, permitting fast vehicle setup
  • Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
  • Powder coat finish provides a long lasting durable finish
  • Includes surface-mount and flush-mount setup. Flush-mount design used for in-ground installation in lube shops, full-service bays and home garage environments looking for a zero-footprint lift
Back

Specifications

Lifting capacity:
6,000 lbs. (2,722 kg)
Lifting height:
43" (1,093 mm) / (minus 4-38" for sub-surface flooring)
Lifting height + blocks:
45" (1,144 mm) / (minus 4-3/8" for sub-surface flooring)
Lift platform dimensions:
19" x 67" (484 mm x 1,701 mm)
Width between platforms:
40" to 46" (1,018 mm to 1,168 mm)
Overall width:
Adjustable
Overall length- surface-mount / flush-mount:
92.6" (2,351 mm) / 67" (1,701 mm)  
Lowered height - surface-mount / flush-mount:
4.5" (116 mm) / Flush with ground
Lifting time:
35 seconds
Motor:
110 or 220 VAC / 60 Hz / 1 Ph
Back
Back