Omer FOX 65 / Flush or Surface Mount
Omer's industry leading FOX 65 scissor service and alignment lift. 14,000 lb capacity.
Built to a higher standard of quality; made in Italy by O.ME.R S.p.A., a world leader in Lift Manufacturing for over 40 years in an ISO 9001 facility.
Incorporating a minimal footprint, extending the use of the shop floor and giving uninhibited vehicle access for the operators.
Platform Runways are rigid and built to resist deflection regardless to vehicles wheelbase or weight distribution – this translates in precise alignment readings.
Thanks to innovative master/double slave hydraulic system, synchronization between runways is granted with the greatest precision.
The drive-on ramps remain attached to the platforms when the lift leaves the ground, maximizing the shop floor. Their length allows even the lower vehicles to get on the lift.
The pivots points are manufactured for longevity, incorporating an anti-rotation system, self-lubricating bushings and zerk grease fittings.
ALI Certified and built to the highest safety standards.
Multiple Safeties within the system including parachute valves, mechanical safety devices, automatic insertion, photocells to control the synchronization of the runways, microswitch with acoustic buzzer to complete lowering process, low voltage controls (24v), and “deadman” controls.
Hot-Dipped Galvanization of the whole structure as an option, offering extra protection from corrosion due to water or salt exposure, and dramatically extending the life of the equipment.
Surface Mount:
- Capacity : 14,000 lbs.
- Platform Length: 219.7"
- Runway Width: 25.6"
- Raised Height: 77.2"
- Lowered Height: 10.4"
- Overall Length: 287.2"
- Length Rear Slipplates: 89.4"
- Max Service Wheelbase: 185"
- Power Requirement: 220V / 1Ph
- Recommended Bay Size: 14' x 28'
Flush Mount:
- Capacity : 14,000 lbs.
- Platform Length: 219.7"
- Runway Width: 25.6"
- Raised Height: 66.5"
- Overall Length: 236.4"
- Overall Width: 91.25"
- Length Rear Slipplates: 89.4"
- Max Service Wheelbase: 185"
- Power Requirement: 220V / 1Ph
- Recommended Bay Size: 14' x 24'
| Style | SURFACE | FLUSH |
|---|---|---|
| Lifting Capacity* | 14,000 lbs. | 14000 lbs |
| Raised Height | 77.2” | 66.5” |
| Overall Length | 287.2” | 236.4” |
| Overall Width | 91.25” | 91.25" |
| Width of Runways | 25.6” | 25.6" |
| Platform Length | 219.7” | 219.7" |
| Lowered Height | 10.4” | - |
| Maximum Wheelbase | 185” | 185" |
| Wheel Alignment (Max.) | 185" | 185" |
| Length of Rear Slip Plates | 89.4" | 89.4" |
| Noise Level | <75 db | <75 db |
| Voltage (Single Phase) | 220V / 2.2 Kw | 220V / 2.2 Kw |
| Speed of rise | 75 s | 75 sec |
| Air Required (filtered/lubricated) | 90 - 120 psi (20CFM) | 90 - 120 psi (20CFM) |
| Min. Recommended Bay Size | 14' x 28' | 14' x 24' |
| ALI/ETL Certified | Yes | Yes |