Omer TRIPARK

The OMER Tripark is the ideal parking solution in areas where you need to park up to three cars in a space that would otherwise hold only a single vehicle. The individual platforms can bear loads of up to 5,510 lbs. making it capable of handling any passenger vehicle currently on the market.

The Tripark incorporates several levels of safety features in its design. For instance, when lowering vehicles from the upper platform, once the lower vehicles have been removed, the lower platform will raise until it engages the upper platform which activates a safety switch - allowing the last vehicle to be lowered to ground level. This lowering sequence was designed to provide increased stability during movement to ensure the utmost safety. Once at ground level, the vehicle can be driven off of the upper platform using the ramp that is integrated into the platform structure, making the unloading operation fast, easy and most importantly safe.

The platforms on the Tripark are completely smooth and hot-dip galvanized ensuring easy access to the vehicles with the end plate of each platform acting as an integrated ramp. These are manufactured with almond sheet metal which acts to both reduce tire slippage during vehicle loading/unloading operations and to eliminate any potential slip hazard for operators.

The support structure of the Omer Tripark ensures the smooth and silent operation of the lift and gives peace-of-mind knowing that your vehicle's safety is safeguarded at every level thanks to the additional stability provided by the torsion bar on the upper platform.

The design of the Omer Tripark makes parking your car easy and natural thanks to the wheel stop plate installed in the front edge of the platform. Furthermore, the Tripark's platforms are angled slightly forward to lean the car wheels onto the front stops and prevent the vehicle from rolling backwards - even when the emergency brake is not engaged. 

This car storage lift is also equipped with an electronically-actuated mechanical locking stopper. When in the open position, the mechanical locking stopper allows the torsion bar to run up and down unimpeded. When it is in a closed position, it engages the mechanical lock on the torsion bar, which has locking positions at one-inch intervals. When the mechanical lock is engaged, it allows the hydraulic oil to flow back to the tank, removing any unnecessary pressure from inside the hydraulic system, which prevents the overstressing of the hydraulic components and extends the lifespan of the lift.

The Omer Tripark is equipped with an electrical micro-switch that slows down and stops the platforms at their programmed positions. The activation of the micro-switch causes the platform to stop. The placement of the micro-switch was designed in such a way that makes it both highly visible and easily accessible. This was done to aid technicians and make it easier to perform any kind of maintenance or potential emergency intervention. All micro-switches are placed along the column, but their position can be adjusted in accordance with user's requirements.

In the highly unlikely event that a micro-switch malfunctions, the upper platform is equipped with a transversal security bar that is placed underneath the platform.  The transversal security bar mechanically stops the ascent of the vehicle, preventing any potential damage when using the middle platform. This provides an additional level of safety and security to protect you and your vehicle.

The Tripark's columns were also engineered with form and function in mind. Their positioning was designed to provide operators with as much space as possible to open vehicle doors and enter/exit vehicles with ease.

Optional Accessories:

• Hot-dipped galvanization for outdoor use
   
• Waterproof galvanized cover for control unit for outdoor installation
   
• Waterproof push button board IP 54
   
• Limit switches / vehicle detecting photocell for electronic collision prevention
   
• 1PH Standard / Optional 3PH available