Peak 408-HP
8,000 lb. Capacity / 110V ETL Power Unit / Includes Drip Trays / Anchor Bolts
96.62" Height, 105.62" Width, 207.25" Length
The Peak 408-HP is the taller version of the 408-p. The same 8,000-lb. capacity four-post lift but with an added 14". The perfect service lift for shops with limited floor space or home garages, the 408-HP requires no special foundation or complicated installation.
Features
- 8,000-lb. lifting capacity
- 14" taller than 408-P Model
- Hidden safety locks and manual single-point release
- Double-"S" shaped columns increase column strength
- Commercial double safety locks
- Skid proof diamond platform
- Steel drive up ramps included
- Optional jack tray (1pc), caster kit (4 pcs)
- Fully portable with optional caster kit
408-HP Specifications
*This diagram is intended for illustrative purposes only and should not be construed as an authoritative representation of the actual product, system or design.
Capacity
Lifting Capacity*
8,000 lbs. (3,628 kg)
*Max Capacity / Front Axle
4,000 lbs. (1,814 kg)
*Max Capacity / Rear Axle
4,000 lbs. (1,814 kg)
Rise
A - Min. Runway Height:
6.1" (155 mm)
B - Max. Clearance On Top Lock:
78.3" (1988 mm)
C - Max. Lifting Height:
87.8" (2227 mm)
Time to Full Rise:
83 seconds (110V)
Outside Dimensions
D - Overall Width:
105.6" (2684 mm)
E - Outside Length:
173.9" (4415 mm)
F - Overall Length:
207.3" (5265 mm)
G - Height of Columns:
96.6" (2455 mm)
Inside Dimensions
H - Width Between Columns:
96" (2438 mm)
I - Drive-Thru Clearance:
81.6" (2074 mm)
Runways
J - Runway Width:
18.8" (475 mm)
K - Length of Runways:
166" (4217 mm)
L - Width Between Runways:
37" (940 mm)
M - Runway Centerline:
55.8" (1417 mm)
N - Outside Edge of Runways:
74.4" (1890 mm)
Locking
Locking Positions:
17
Lock Spacing:
Every 4" (102 mm)
Power Unit
Motor:
1.0 HP 110V