BendPak XPR-12CL-192
12,000 lb. Capacity / Clearfloor / Extended Height
192" Height, 155" Width, 69" Rise
The XPR-12CL 192 is just as feature rich as the XPR-12CL but with a 24" bolt-on extension, making servicing taller vehicles much more viable. With it's Clearfloor design, which offers enough space for cars and trucks up to 12,000 lbs and the pure Direct-Drive performance, the XPR-12CL 192 is packed with cutting-edge technology and top-of-the-line materials. The XPR-12CL 192 two-post lift can easily raise your largest full-sized pickups and commercial vehicles - especially with it's 24" bolt-on extension. This is truly a well-rounded, multi-purpose lift.
BendPak XPR-12CL-192" Extended Height Two Post Lift
The safe and rugged XPR-12CL-192 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.
Features
- 12,000-lb. lifting capacity
- 192" lifting height
- CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
- Padded overhead safety shutoff bar
- Extended height top-beam provides greater overhead clearance
- Single-point safety release
- Dual direct-drive hydraulic cylinders
- Dual-synchro equalization system for equal lifting
- Oversized 53" tall carriage for superior strength and durability
- Electric / hydraulic power system
- Oversized A36 steel base plates
- Self-lubricating dura-glide UHMW polyethylene bearing system
- Safety locks in each column spaced every 3"
- Plated arm restraints and arm pins for rust prevention
- Heavy-duty 1/2" aircraft-quality equalizer cables
- Oversized cable sheave diameter reduces cable fatigue
- Durable, rubber lift pads with stackable adapters
- 16-piece specialty adapter set includes four 6" stackable adapters, four 3" stackable adapters, four polyurethane contact pads and four frame cradle pads
- Convenient storage is included for truck and van adapters
- Triple-telescoping arms provide increased range for lifting point access
XPR-12CL-192 Specifications
Capacity
Lifting Capacity*
12,000 lbs. (5,443 kg)
*Max Capacity / Front Axle
6,000 lbs. (2,722 kg)
*Max Capacity / Rear Axle
6,000 lbs. (2,722 kg)
Rise
A - Rise:
69" (1,753 mm)
B - Rise + Pad Only:
74" (1,880 mm)
C - Rise + Pad + 63 mm Adapter:
80" (2,032 mm)
D - Min. Height + Pad:
5" (127 mm)
Time to Full Rise:
45 seconds
Outside Dimensions
E - Height Overall:
192" (4,876 mm)
F - Width Overall:
155" (3,937 mm)
G - Outside Columns:
144" (3,658 mm)
Inside Dimensions
H - Inside Columns:
120" (3,048 mm)
I - Drive-Thru Clearance:
106" (2,692 mm)
J - Floor To Overhead Switch:
165" (4,191 mm)
Arms & Pads
K - Front Arm Reach: (MIN)
32" (813 mm)
K - Front Arm Reach: (MAX)
60" (1,524 mm)
L - Rear Arm Reach: (MIN)
32" (813 mm)
L - Rear Arm Reach: (MAX)
60" (1,524 mm)
Max Load Per Arm
3,000 lbs. (1,361 kg)
Shipping
Weight:
220 VAC / 60 Hz / 1 Ph
Dimensions:
45 dB